Exfo FLS-5800 CD/PMD Analyzer Source Bedienungsanleitung PDF herunterladen (Seite 28)

Controlling the Source Remotely

22 FLS-5834A

The RS-232 connector (serial port) at the back of the CD/PMD Analyzer

Source uses a DTE pinout configuration.

The commands used in both protocols are the same and are summarized

in two reference tables:

³ Common GPIB commands are listed in IEEE 488.2 Commands—Quick

Reference table on page 59.

³ Specific commands for the CD/PMD Analyzer Source are shown in the

Product-Specific Commands—Quick Reference table on page 81.

You can find detailed information in the Remonte Control Commands

appendix.

When the CD/PMD Analyzer Source is remotely controlled, RM appears in

the upper right-hand corner of the display.

Pin Number Description Direction

2Receive (Rx)Input

3 Transmit (Tx) Output

5 Signal ground (Gnd) —

1234 5

6789

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 97 98

Keine Kommentare

Exfo FLS-5800 CD/PMD Analyzer Source Bedienungsanleitung Seite 28